Equipment for construction and road laboratories
+7 495 245 00 04  E-mail:
+7 985 128 89 56 Русский  English 

Automatic test press TP-1-2000 (two ranges of 30/200 tons)

Determination of the compressive strength and splitting strength of samples of building materials: concrete, brick, cinder block and other materials. Full automatic testing: supply, maintenance of force growth, withdrawal, calculation of all parameters according to GOST.

550,000 RUB/pcs.
+ -
Add to cart
Мы работаем без НДС
The press performs the following operations:
  • Determination of the strength of concrete cubes with rib length: 70 mm, 100 mm, 150 mm, according to GOST 10180-2012;
  • Determination of compressive strength of concrete cylinders with a diameter of: 70 mm, 100 mm; 150 mm; 200 mm; 250 mm, according to GOST 10180-2012;
  • Determination of tensile strength when splitting concrete cubes, with rib length: 100mm; 150mm, according to GOST 10180-2012;
  • Determination of the tensile strength of concrete during bending and splitting of square-section prisms, sizes: 70x70x280; 100x100x400mm, 150x150x600mm, 200x200x800, according to GOST 10180-2012;
  • Determination of the compressive strength of bricks according to GOST 8462;
  • Determination of crushed stone crushing capacity for compression in molds, diameter: 75 mm, 155 mm, according to GOST 8269.0-97;
  • Determination of the compressive strength of cinder blocks;

Technical and metrological characteristics:
  • Measuring range: from 30 kN to 2000 kN (from 3 to 200 tons);
  • Force growth rate: from 1 kN/s to 30 kN/s;
  • Measurement accuracy: ±1%;
  • Diameter of pressure plates: 220 mm;
  • Vertical clearance: 320 mm;
  • Piston stroke: 60 mm;
  • Dimensions (H/W/D): 950/680/400 mm;
  • Supply voltage: 220 Volts/50Hz
  • Power consumption: 1 kW.;
  • Weight: 490 kg.;
  • Automatic computer control, 19-inch color screen;
  • Automatic processing of results;
Free consultation, 1 year warranty repair, commissioning;
Entered into the State Register of measuring instruments of the Russian Federation.
Registration number in the State Register of Measuring Instruments No. 60244-15

  • Automatic sample feeding and touch;
  • Automatic output to the set speed of force growth;
  • Automatic maintenance of strength growth rate;
  • Automatic determination of the moment of destruction of the sample;
  • "CLEAN" test mode, destruction without fragments;
  • Automatic removal to the initial position of the lower movable plate;
  • Automatic execution of all the listed functions, with one click of the "START" button.

  • Press - 1 pc.
  • Control unit -1 pc.
  • On-screen display - 1 pc.
  • Push-button keyboard - 1 pc.
  • Mains power cable - 1 pc.
  • Spacer - 3 pcs.
  • Operation manual. Passport. 427121-002-17690167-2014-RAP - 1 copy.
  • Verification method. 427121-002-17690167-2014-MP - 1 copy.
  • Certificate of verification;
  • Type approval certificate.

The software provides a full range of verification services and assistance in conducting tests, according to the most common methods listed above standards.
At the request of the customer, FREE OF CHARGE! the required type of test is entered into the program.еобходимый вид испытания.